Thursday, May 19, 2016

Hybrid dress - copying and reusing.

When I was leaving aqua aerobics one morning about 8 weeks ago, I saw someone wearing a dress with a simple elastic gathered A-line, dirndl skirt shape, I think a scoop neck and an action back in woven fabric. It looked so nice and summery and McCall's 6359 came to mind immediately and decided I could and would easily copy it.


What's with the putting views C, A and B in that order? Anyway, I digress. I made View A cut at about 6 cm past the waist measurement on the pattern. At first I made it wider at the side seams to do a sort of lazy simplified FBA, but that didn't work, really changing the shape of the front too much so I cut it back to the right size and due to my small back, there is enough ease in the top.


Let me preface this by saying the top looks better than it does in this photo... I was wearing my swimming sports bra ready to go swimming and it is not a great shape for dresses! (I wear an old but still supportive sports bra under my togs for aqua as I need the support and although this one doesn't give great shape, it's fills a hole for jumping around at aqua letting me be more active). I wore the dress with a convertible bra yesterday and it does sit nicely and the bra gives a much better shape. Why didn't I get someone to take a photo at the glistening pool after aqua yesterday... don't know!


I love the back. It gathers at the  middle part which isn't easy to see in these photos. The instructions get you to put the back straps in between the facing and the right side, so nice and neat, but then it instructs to just sew the straps to the front after finishing the facing. I didn't do this. I like the neat finish with the straps hidden in between the facing and the dress so I sewed them in. I think they do this to make it easier getting the straps the right length but I don't like hand sewing this stuff and really don't see any need. I put the facing on and left the tops of the points open then I pulled the straps through with some safety pins and then adjusted in the mirror and then finished sewing the facing. Much neater. I attached the skirt with a 2cm seam allowance so that I could turn it up to make a casing and thread the elastic through it.

So that's the copying but the reusing is that I made the skirt out of a long pillow case dress I made for myself maybe in January. I usually do this by cutting out a raglan peasant blouse pattern front and back and just turn over the top and back and thread through a tie. This one was from a pattern that was very full and it really just didn't work. I wore it once and my sister was not very complimentary so I chopped at the underarms and fit the skirt to the top here. That's why it may look a little short to some, but I like a maxi right at my ankles so I don't trip!  The tie I used for the straps on the old dress is the waist tie on the new dress. The fabric was part of my only online fabric purchase. I've mentioned this before that it was listed as a rayon but it is definitely a mix as the paisley "print" is heat embossed on and this can only be done with synthetic fibres... it kind of melts the print on... kind of like the iron does to your fabric when you don't want it to! I love the colour and have had a number of nice comments about the dress and colour and although I'm disappointed it isn't rayon, it was only $2 a metre.

It's not perfect as I should have made the back bodice a bit shorter as it blouses much more than the front. I'm pretty short at the back, well probably the same as the front length but the bust pulls the front up and I should have taken this into account, other than that, I'm pretty happy with my hybrid dress. I have started another maxi dress for my sister using View B with the scoop neck - but I made a boo boo and then a save. That'll be next plus some fleecy jumpers (i.e. sweatshirt and jacket) for Alex. Oh and just a quick note about the pineapple kimono and shorts - my niece LOVES, LOVES, LOVES them so I'm super happy that she's happy despite the trials in sewing them.

Saturday, May 7, 2016

The pineapples will not beat me... although they did try.


So that's the finished product. Kimono and sleep shorts (or maybe they'll be beach shorts? Who knows? When I made my pineapple skirt, my niece loved the print and asked if she got some would I make her something. Of course I would.. I love making things for my niece as she appreciates the time and effort involved. Although, this wasn't to be much effort - ha a kimono style, light dressing gown - how hard is that! What could go wrong?


This is just a cotton bias tape hanging tab. I hate not being able to hang things and the cotton bias tape is soft and cotton and I have it in three useful colours. I didn't have a kimono pattern so just used the McCall's dressing gown pattern I used a few weeks ago and adjusted the pattern to cut some kimono sleeves on. Easy. Hope it fits well. I have put some belt tabs on - three as I hate when the belt falls out of them. I think it will need an extra tie in the inside but I'll get my niece to tell me where she wants it when she tries it on. She's back from her work tour tomorrow evening.


Boy this was a never ending story though. It really tried my patience. After putting on the band around the front and neck, I overlocked it and I managed to snip a bit mid top back. Drats! What a pain. There was so much soft, floaty fabric and not much room around the overlocker but I was really trying to keep it all out of the way. (I've done this one before on a red satin ball gown that I was to wear to a "party like it's 1999" ball because it was NYE 1999 but it's still sitting unfinished because I caught a snip and it was the day before NYE so I gave in and went and bought a dress - which was a lovely, long, black beaded dress that I got for a steal and I still have. I'll eventually finish that dress but no hurry as it wouldn't fit me at the moment anyway ;) ) So that's the 'repair' I did. I put some fusible interfacing on the inside and sewed over the 1 cm V snip. It was pretty invisible but I still wanted to disguise it.


I found this large cotton bias tape harvested from some pants that died so I put two tabs on and great, you can't see the snip. Then I went to trim the final thread from putting the bias on and then 'snip' I cut a tiny snip in the fabric again. ARRRGGGGHHHH!!!! I was ready to toss it in and go and buy some more fabric and just start again but Trad's, where we bought the fabric has moved about 45 minutes away so I decided I would persevere.

And persevere I had to because that wasn't the end of the woes. I decided I would use some elastic that has the cord threaded through it on the waistband. I positioned where I wanted the button hole to go for the cord to thread through, I reinforced it with some iron on fusible and made my button hole. I made a test one - perfect. Set it up, made the button hole and it stopped half way. So I pulled that one out, no mean feat in soft rayon they made another one. It went crooked. Argh! I pulled out the threads gently which took forever and then put the shorts away in the naughty corner. Then I went back to the kimono to finish hemming and the sleeves and got it back from the naughty corner a few days later. Thank goodness the button hole went smoothly. I overlocked the elastic on the waist and flipped over to sew it down. Wow, I'll be so glad when this is done I thought to myself - ha. Would you believe that I had to change the top thread twice and the bobbin thread 3 times for about 90 cm of sewing. I was so glad it was done. Some things just do not want to be made or are just resistant for some reason but I am tenacious if nothing else and I would not be beaten by pineapples. Anything beaten you lately - or tried to?

This isn't the end of the pineapples either. I have some my niece bought in a black colour way for elastic casual pants for my Mum. In the meantime I have finished a dress that's a bit of a mash up and save. That'll be next.


Finally, Happy Mother's Day for tomorrow for all the Mum's out there. This is the pink tinged pavlova that's in the oven as we 'speak' getting cooked for lunch at my sister's place tomorrow. 

Sunday, May 1, 2016

Weft Metal


When I took the photo of the label on my newly made pants, I was nearly 100 percent that this fabric had metal threads... see the shiny bits from the flash? So to confirm my suspicions 100 percent I did a burn test.


Pretty conclusive really! The weft threads are wires and are like steel wool. They are very fine as you can probably see in the photo. The warp is cotton - a quick burning and then fine ash left.

I could actually feel the wires when I walk in that way that is a little annoying. I wonder what that did to my overlocker blades now I think of it?? The reason I was sure is because I also have some white shirting type fabric that I bought a number of years ago from the industry fabric sale I go to and remember this Burda jacket I made in 2009?  When I bought that fabric (and some more in a silver/grey) the woman there told me that it had metal threads also and again you can feel the little pinch every now and again when you move.



I also made this little Ottobre shirt with a scrap of the white I bought at the fabric sale last year. Same thing - I made some bias out of it for the armholes and neckline and the little thread kept scratching me.



So just raced off and did the burn test for the white fabric.... yep, definitely metal threads. I pondered with my son about what would happen if I wore the pants through the airport security arch?? I will check with my friend at aqua aerobics tomorrow - she works for airport biosecurity, but maybe she'll know. Anyone out there have an idea? You'd have to think it would register as it would be quite an amount of metal in a pair of trousers... don't want to forget and have to find out the hard way. I can just see it..."yes I know I buzzed, but you see my trousers are made with cotton fibres and metal threads." "Sure they are lady, sure they are. Step into this booth please ma'am."

Incidentally that top has been binned because it got stained with sunscreen... anyone know how to get sunscreen out of clothes?

 So have you sewn anything with metal threads through it?  So many questions today!

Moving on (if only I could), that pineapple dressing gown is really trying my patience! It'll be finished in the next few days (all going well, and well, it hasn't been so we'll see!) or else it'll end up as scrap!